What Size Sand Filter For Above Ground Pool?
A sand filter’s size will depend on the size and shape of your above ground pool. With that in mind, let’s look at what size sand filter would work best for your pool area.
What Is The Right Size Pool Filter For An Above Ground Pool?
When figuring out the best type of filter for your pool, it’s recommended choosing one that is at least 1 sq. ft. for a 10,000-gallon pool capacity. For instance, a 16″ sand filtered system features a 1.55″ sq. ft. filtered area. This size sand filter is now ideal for a 15,000-gallon pool.
What Is The Right Size Pool Pump For An Above Ground Pool?
Follow our guide below to figure out the right size pool pump for your above ground pool.
Oval Above Ground Pools
- A 1 horsepower pool pump is necessary for a 24 x 30-foot pool.
- Any pool larger than 24 x 30 calls for a 1.5 horsepower pump.
Round Above Ground Pools
- A 1 horsepower pool pump is needed for a pool up to 24 ft. around.
- Pool owners should opt for a 1.5 horsepower pool pump if the pool is more than 24 ft. around.
How To Clean A Sand Filter
Follow these simple steps below to properly clean your pool’s sand filter.
Step 1. Prepare To Backwash
- Check the pressure gauges to start.
- Turn off the pump, switching the circuit breaker to “off.”
- Change the pool filter valve’s setting.
- Position the waste hose.
Step 2. Backwash Filter
- Run the pump for a good two minutes.
- Watch the sight glass.
- Turn the pump back off.
Step 3. Final Rinse
- Switch to the “rinse” setting.
- Return it back to the “filter” setting.
- Now, check your pressure gauges one last time.
Finding Professional Pool Maintenance In Arizona
Brian’s Pool Care offers professional pool maintenance in Ahwatukee, Arizona to help pool owners experience expert pool maintenance services for an affordable price.
Troubleshoot “Pool Filter Not Turning On” In Ahwatukee, Arizona
If you are searching “Pool Filter Not Turning On” Near Ahwatukee, Arizona, Brian’s Pool Care can help!
Pool Filter Not Turning On In Ahwatukee, Arizona
If it seems like your pool’s filter may not be turning any (or) it does not have any sounds coming out of it. Here is what to do if there is no sound coming from your pool filter.
If there is no sound coming from your pool’s filter:
If nothing happens when the switch is flipped and there was no sound heard at all, take a look at the circuit breaker, this can be checked by flipping the breaker on and off, and back to on.
If you have it on a mechanical timer switch or a digital timer switch you will need to look at the Visual Motor Check and check the tiny motor gears to see if they are turning.
If your system has a GFCI outlet wired to it, you will need to check it and see if the red button has not popped up.
If there is power getting to the timer clock or the timer switch, you will need to look at the wires that run from the switch, going to the pump for signs of any damage, then, inspect the connections found on each end, you will be looking for loose wires or even an insect infestation.
However, if there is no power getting to the timer clock or the timer switch, it means that the switch or the breaker is either bad or its tiny little motor has died, or that one or more of the wires running from the breaker to the timer clock, or timer switch could be broken or loose. Here is what to do if there is sound coming from your pool filter.
If there are sounds coming from your pool’s filter:
If there is a humming sound coming from the pump motor when you try to start it, it could mean that the start capacitor is bad. If it is a Hayward pump, it will be the black cylinder which is mounted near the rear of its motor. This can be removed and replaced very easily.
However, before you order a new capacitor, make certain the shaft has not frozen up with rust. In order to spin the shaft, you will need to disconnect the power at the breaker, and remove capacitor (@9 o’clock) and (@ 12 o’clock) for the thermal overload in order to be able to slip a 7/16th inch wrench into the slotted shaft.
In order to break off any rust that has accumulated between the stator and the rotor, you will need to wiggle the wrench in the shaft by going through several revolutions. Next, you are going to re-secure the thermal and the capacitor overload switch.
PROFESSIONAL Pool Filter Repair In Ahwatukee:
If you can’t figure out how to fix your problem, let the professionals troubleshoot your pool filter not turning on. Brian’s pool care offer pool filter repair in Ahwatukee to help homeowners get their pool filters working again. Schedule Pool Filter Repair In Ahwatukee, Arizona by Calling Brian’s Pool Care at 480-907-7959 to receive professional pool filter repair services in Ahwatukee, Arizona.